AutoSim Pro-Master Kit-Model – 7190


SKU: 7190 Category: Tags: , ,


Ditex AutoSim Pro – Master Kit – Model 7190  New! 

Automotive sensor simulator and signal generator with additional accessories

AutoSim Pro Master Kit Model 7190
AutoSim Pro Master Kit Model 7190

Since its release in 2012, the AutoSim sensor simulator has proven itself extremely popular with both technicians and professional diagnosticians thanks to its friendly user interface, attractive and reliable operation.  The Master kit includes the AutoSim Pro and the most frequently used additional accessories to the already popular AutoSim Pro Automotive Sensor Simulator from Ditex.

Eight years on from the release of the original model, Ditex presents the second generation AutoSim Pro. Distinguished by its completely updated design and

significant functional improvements, the AutoSim Pro Automotive Sensor Simulator from Ditex is a very useful Ditex AutoSim Protool suitable for both cars and trucks applications in a variety of working situations. This advanced sensor simulator creates an electrically equivalent system to simulate the sensors and actuators found on an actual vehicle.

In general, the AutoSim Pro is a specialized signal generator for testing sensors, including leads and connections when installed. In this way, it is possible to tell whether an ECU, a feed, a plug-in connection or a sensor is defective. This allows efficient fault elimination without replacing parts “on suspicion”. One of the special features of this device is its easy and intuitive operation via function keys. The display continuously shows the most important settings such as current waveform, frequency, amplitude, offset, ramp time and pulse width.


Note: Training video shows Auto Sim Extended (Master) Kit accessories

Signal generator

Providing the most important signals: sine, square, triangle and ramps, up to 20 kHz make the device the ideal companion for experiments with all type components and sensors as well as for the analysis of electrical wiring circuits. You have complete control over the output signal: peak-to-peak amplitude, frequency, duty-cycle and pulse width. A microcontroller sets the output voltage in the range of 0V to ±12V accordingly to the programmed curves.


PWM generator for the dynamic control of vehicle actuators using pulse width modulation. The PWM generator function was specially designed to control flaps, actuators, valves, injectors and smaller DC motors. Generating variable power PWM signal up to 4 A.

Precise DC voltage source

The AutoSim Pro low-noise, high-resolution DC voltage output function is the right choice when a precision source of DC voltage is needed. Its bipolar output delivers up to ±12 V with 10 mV resolution and up to 35 mA of current.

Sensor embedded presets

Automotive Sensor Simulator with built-in preset configurations for simulation of CKP Inductive, CKP Hall Effect, Lambda sensor Zirconia, Lambda sensor Titania and Knock Sensor. You can disconnect sensor from the vehicle harness, inject the signal in the harness and watch the scope to see if the PCM responds positively.


  • Handheld standalone device;
  • Intuitive operation via function keys;
  • Ultra-fast boot time;
  • Excellent industrial design;
  • Operates on both 12 and 24 Volt electrical systems;
  • Illuminated 2.4″ TFT LCD 320х240 display for optimum visibility;
  • Protection against reverse polarity connection;
  • Low distortion factor and high signal-to-noise ratio for brilliant signals;
  • Adjustable frequency range from 0.1 Hz to 20 kHz;
  • Generating variable power PWM signals up to 4 A;
  • One-wire hook-up PWM output;
  • Precise DC voltage source;
  • Internal Micro SD card for firmware updates.

In The Set

AutoSim Pro Master Kit (order code: 7190) contains:

  • Plastic Storage Box with Foam;
  • AutoSim Pro basic kit;
  • Insulated crocodile clip, Pack of 2 (Red, Black);
  • Back-pinning Probe Set (5 needles);
  • Crocodile Clip, 4 mm, 25 A, Red;
  • Crocodile Clip, 4 mm, 25 A, Black;
  • Crocodile Clip, 4 mm, 15 A, Blue;
  • Pluggable Terminal Block (2-Pin, 5mm);
  • SD card to Micro sd card adapter.

Basic kit contains:

AutoSim Pro General Specifications

Sampling rate200 KSa/s
Settling Time4.5 µs
Resolution12 bit
Maximum output frequency20 kHz
Output channels2
Signal outputSOUT
Power outputPOUT
Simultaneous operation of both outputsYes
Standard operating modesWaveforms, DC, Pulse
Built-in automotive presetsYes
High current PWM controlYes
DC Power supply12V, 24V DC (vehicle battery)


TypeTFT LCD Module
Size2.4″ diagonal
Resolution320 x 240 pixels
Backlight4chip white LED in Parallel
High Brightness150 cd/m2

Real time clock battery
CR2032, 210 mA/h – save time for up three years without external supply

Important note: Because of lithium-ion battery shipping restrictions, we do not include CR2032 lithium-ion battery inside in the air mail post packages. When you receive the tester, you have to buy a Li-Ion battery type CR2032 yourself and put it into battery holder socket inside the CarScope i-Tester. To do so, you should unscrew and remove four screws to open the bottom cover. We apologize for the inconvenience!

Included Memory Card
4 GB micro SDHC


Signal output specification:

Output polarityPositive and Negative
Output amplitude±10 mV ~ ±12 V (10 mV step)
DC voltage output range±10 mV ~ ±12 V (10 mV step)
Output current± 30 mA maximum
Vertical resolution12 bits
WaveformsSine, Square, Triangular, Ramp
Sine wave frequency range0.1 Hz ~ 5 kHz
Ramp/Triangular frequency range0.1 Hz ~ 5 kHz
Square wave frequency range0.1 Hz ~ 20 kHz
Square wave duty cycle range, 20 kHz20% ~ 80 %, step 0.1%
Square wave duty cycle range, 10 kHz10% ~ 90 %, step 0.1%
Square wave duty cycle range, up to 5 kHz5% ~ 95 %, step 0.1%
Pulses1 ~ 100
Pulse width1 ms ~ 1 sec
Pulse period2 ms ~ 5 sec

Power output specification:

Output polarityPositive
Amplitude12 V
Max. output current4 A continuous
Active level“switched earth”
Output frequency rangeup to 2 kHz
PWM duty cycle range1% ~ 100%
Duty cycle setting accuracy0.1%
Thermal shutdownYes
Over voltage protectionYes
Current limitationYes
Short circuit protectionYes


Power supply range10V DC to 28V DC
Power connectorPluggable Terminal Block 5.0mm, 2 POS
Quiescent power current≤160mA
Ambient temperature0°C ~ +35°C
Ambient humidity0%RH ~ 85%RH
Dimensions160 mm x 94 mm x 25 mm



There are no reviews yet.

Be the first to review “AutoSim Pro-Master Kit-Model – 7190”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.